1. The plate base need a thickness 110 mm. ( 2000x1930x110). Not correct the mould maker design, In the project mould maker is (2000x1930x100).
模板座厚度110mm ( 2000x1930x110)。不需更改制造商的设计,在此项目中制造商的设计为(2000x1930x100)
2. The core plate need a tickness 450 mm. ( 2000x1930x450). Not correct the mould maker desing, in his project the tickness is (2000x1930x450)
型芯板的厚度为450 mm. ( 2000x1930x450) 无需更改制造商的设计,在此项目中制造商的设计为(2000x1930x450)
3. The core size are 920x840x910 and will be make with P20
型芯尺寸为920x840x910由P20制成
4. The ejection will be necessary with a many rings like′s our project. In the project mould maker is just one ring, and the customer don′t accept.
在我们的项目中,顶出机构要配多个模圈。在制造商的项目中只有一个模圈,但顾客不会接受。
<
|